Subject: reservoir mass balance Posted: 7/27/2015 Viewed: 16671 times
in reservoir mass balance (bilan), i have told to make sure that the initial and end of period storages are equal.
is there any way that i can do it via automation, or it must be done manually?(actually i am using API and i cannot do it manually)
Mr. Jack Sieber
Subject: Re: reservoir mass balance Posted: 7/27/2015 Viewed: 16659 times
The only way to force WEAP to keep the reservoir storage constant (not changing) is to set the Top of Conservation equal to the Top of Inactive storage. This will prevent WEAP from releasing any water from storage, but also from storing any additional water.
Ms. Mitika Farkya
Subject: Re: reservoir mass balance Posted: 7/27/2015 Viewed: 16626 times
On what principle water balance works in WEAP
Dr. Soroosh Alahdin
Subject: Re: reservoir mass balance Posted: 7/28/2015 Viewed: 16610 times
thanks, but i mean first time step(initial like the first month in current scenario) and the last one("end of period" like end of reference scenario).
Mr. Jack Sieber
Subject: Re: reservoir mass balance Posted: 7/28/2015 Viewed: 16605 times
If you want the reservoir storage after the last timestep of the simulation to be the same as at the start of the simulation, you could set the Top of Conservation and Top of Inactive storage to the initial storage value.
