Subject: Inflows from Reuse Posted: 11/10/2020 Viewed: 3633 times
Hello. I computed three scenarios 1}reference scenario, 2} rainwater harvesting, 3) rainwater harvesting and reuse. For the reuse, I activated reuse for the demand sites.
When it comes to analyzing the results, I can't see any inflows representing the reuse (demand sites inflows and outflows), nor can I see any other separate results which clearly reflects the effects of reuse and DMS. Can anyone assist?
Ms. Anne Hereford
Subject: Re: Inflows from Reuse Posted: 11/11/2020 Viewed: 3624 times
You can see the reuse visualized in the results view under Input Data/Demand Sites/Loss and Reuse.
You should also see a reduction in the flow from the river or other sources that supply the demand sites for the water reuse scenario. See the results under Supply and Resources/Transmissoin Link/Flow.
And, it might be a small change and therefore difficult to notice on the graphs, but streamflow will also be affected in the segment downstream of the transmission link from the river to the demand site with reuse. You should be able to see this quantified in the Table view of the results.
Ms. Annah Ndeketeya
Subject: Re: Inflows from Reuse Posted: 11/12/2020 Viewed: 3614 times
Thank you. I have managed to see the reduction in return flows etc. I was visualizing the demand sites inflows and outflows graph, and thought it reuse will show as a separate inflow. But it's ok, I can work with what I have.